Contact Us

We'd love to hear from you!

Have a question? Just want to chat about post & beam construction? Feel free to call either Pete at 203.534.8771 or Laurie at 727.415.6488.

Or, e-mail us via the form to the right and we'll contact you shortly!

 

           

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

T-REX Tooling

Our T-REX Framing System - also patent pending - was precision-engineered to enable highly accurate cutting of beams and timbers. The five different tools make post and beam framing a breeze, while preserving clean and modern lines. While you can get by with basic carpentry tools, you must have a tool to cut a 1/4" slot and our Slotter is good choice for that purpose. The entire set of tools will make your job a whole lot easier, though!  Watch the videos below to see exactly how to use the T-REX Framing System.

T-REX Framing System ...Discover the Ease of our Custom Tooling

Our T-REX Framing System was precision-engineered to enable highly accurate cutting of beams and timbers.  The custom tools we offer make post and beam framing a breeze, while preserving clean and modern lines.  While you can get by with basic carpentry tools, you must have a tool to cut a 1/4" slot and our T-REX Slotter is good choice for that purpose.  Although the entire set of tools will make your job a whole lot easier!  Watch the videos below to see exactly how to use the T-REX Framing System.  We take each order personally over the phone, so call Laurie at 727.415.6488 anytime.  CLICK ANY PICTURE ABOVE TO WATCH THEM SCROLL!

 
 

T-REX Framing System

T-REX Slotter - clamp this custom tool onto any chainsaw with a minimum bar length of 18" to make the 1/4" slot required for the T-REX connector.  We recommend using an electric Stihl Chainsaw MSE 250 C-Q which, together with the Slotter, creates an easy slot.

T-REX Rotary Table - a versatile custom tool used in conjunction with the Accutech Micro Mill for accurate angle and square cutting.  An electric 14.5 amp Makita Chainsaw with a 16” bar is what we choose, but any saw can be used.

placeholder_2.jpg

Accutech Micro Mill - used with the T-REX Rotary Table for your rafter and beam cutting needs.  

 T-REX Drill Jigs - made of HDPE with steel bushings, there are nine (9) standard sizes available to drill precision holes for the pins.  Custom sizes are also available.

T-REX Router Guide - a custom adapter plate fitting onto the Makita Compact Router #RT 0701C in order to chamfer the slot for a perfect T-REX connector fit.

T-REX EZ Slotter - a limited-use tool designed as another option to make the 1/4" slot required for the T-REX connector.  Any saw that can cut a 1/4" slot can be fastened to the EZ Slotter.